ADLINK PCI-7856 - Manual (Page 65)

MotionCreatorPro 2 53
PCI-7856
User’s Manual
5 MotionCreatorPro 2
After installing the hardware, it is necessary to correctly configure
all cards and double check the system before running. This chap-
ter gives guidelines for establishing a control system and manually
testing the PCI-7856 to verify correct operation. The software pro-
vides a simple yet powerful means to setup, configure, test, and
debug a motion control system that uses PCI-7856.
Note that MCP2 is only available for Windows 2000, XP and Vista
with a screen resolution higher than 1024x768. Recommended
screen resolution is 1024x768. It cannot be executed under the
DOS environment.