Flow control, Vt-utf8 combo key support, Recorder mode – ADLINK cPCI-6930 User Manual
Page 102: Resolution 100x31, Legacy os redirection resolution, Putty keypad, Redirection after bios post
88
BIOS Setup
Communication with slow devices may require more than 1
stop bit. Set this value to 1 or 2.
Flow Control
Set this option to select Flow Control for console redirection.
The settings for this value are None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Enabled VT-UTF8 combination key support for ANSI/VT100
terminals. Options: Enabled/Disabled.
Recorder Mode
When enabled, only text will be sent. This is to capture terminal
data. Options: Enabled/Disabled.
Resolution 100x31
Enables or disables extended terminal resolution. Options:
Enabled/Disabled.
Legacy OS Redirection Resolution
In legacy OSes, the number of rows and columns supported by
redirection. The settings for this value are: 80x24, 80x25.
Putty KeyPad
Select FunctionKey and KeyPad on Putty. Options: VT100,
LINUX, XTERMR6, SCO, ESCN, VT400.
Redirection After BIOS POST
The Settings specify if BootLoader is selected than Legacy
console redirection is disabled before booting to Legacy OS.
Default value is always enabled which means Legacy console
redirection is enabled for Legacy OS. Options: Always Enable,
BootLoader.