ADLINK cPCI-6930 - Manual (Page 135)

IPMI User Guide 121
cPCI-6930
OemPowerOn
This command is implemented to control the system’s status if
power-on is required. Operators can control the system remotely.
10.4 CompactPCI Address Map
Since more than one system may be installed in a single chassis,
we allocate each IPMB address based on GA input as peripheral
cards. The CompactPCI Peripheral Address Mapping Table is
given below.
Response 0 Complete Code 00h means OK
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F7h OEM defined command
Response 0 Complete Code 00h means OK
CompactPCI Peripheral Address Mapping
Geo. Addr. IPMB Addr. Geo. Addr. IPMB Addr.
0 Disabled 16 D0h
1 B0h 17 D2h
2 B2h 18 D4h
3 B4h 19 D6h
4 B6h 20 D8h
5 B8h 21 DAh
6 Bah 22 DCh
7 BCh 23 DEh
8 BEh 24 E0h
9 Coh 25 E2h
10 C4h 26 E4h
11 C6h 27 E6h
Action Byte Value Description