ADLINK cPCI-6930 - Manual (Page 129)

IPMI User Guide 115
cPCI-6930
10 IPMI User Guide
10.1 Introduction
This chapter is written for those who already have a basic under-
standing of the newest implementation of the baseboard manage-
ment controller (BMC) of the Intelligent Platform Management
Interface (IPMI) specification rev. 1.5. It also describes the OEM
extension IPMI command usages which are not listed in the IPMI
specification.
10.2 Summary of Commands Supported by
BMR-AVR-cPCI
The table below lists all the commands supported by the
BMR-AVR-cPCI. The rightmost column indicates if the command
is required by PICMG 3.0/ PICMG 2.9, or is optional.
Command
IPMI
Spec
NetFn CMD
IPM Controller Req
(PICMG 2.9)
IPM Device “Global” Commands
Get Device ID 17.1 App 01h Mandatory
Cold Reset 17.2 App 02h Optional
Warm Reset 17.3 App 03h Optional
Get Self Test Results 17.4 App 04h Mandatory
Get Device GUID 17.8 App 08h Optional
Broadcast “Get Device ID” 17.9 App 01h Mandatory
IPMI Messaging Support Commands
Send Message 18.7 App 34h Optional
BMC Watchdog Timer
Reset Watchdog Timer 21.5 App 22h Optional
Set Watchdog Timer 21.6 App 24h Optional
Get Watchdog Timer 21.7 App 25h Optional
Event Commands
Set Event Receiver 23.1 S/E 00h Optional
Get Event Receiver 23.2 S/E 01h Optional