ADLINK cPCI-6930 - Manual (Page 75)

Driver Installation 61
cPCI-6930
6 Driver Installation
The cPCI-6930 drivers are available from the ADLINK All-In-One
CD at X:\cPCI\cPCI-6930\, or from the ADLINK website
(http://www.adlinktech.com). ADLINK provides validated driv-
ers for Windows 7 32-bit. We recommend using these drivers to
ensure compatibility. The VxWorks BSP can be downloaded from
the cPCI-6930 product page on the ADLINK website.
The following describes the driver installation procedures for Win-
dows 7:
1. Install the Windows operating system before installing
any driver. Most standard I/O device drivers are installed
during Windows installation.
2. Install the chipset driver by extracting and running the
executable program in ...\Chipset\Intel Chipset Device
Software_ Win7_2008_All_9.2.3.1013.zip.
3. Install the LAN drivers for the 82580 controller by
extracting and running the executable program in
…\LAN\Intel 82580 Gigabit Network Connection_
WIN7_32_11.14.43.0.zip.
4. Install the graphics driver and utilities by extracting and
running the executable program in ...\Graphics\Silicon
Motion SM750_Win7_2008_32_6.13.1.31.zip.
5. Install the Audio driver by extracting and running the
executable program in …\Audio\RealTek_High Defini-
tion Audio_WIN7_2008_32_6.0.1.6.0.1.6410.zip.
6. Install the USB 3.0 driver by extracting and running the
executable program in …\USB3.0\Texas Instruments
XHCI Controller Win7_2008_All_1.12.7.0.zip.
7. Install the AHCI/RAID utilities by extracting and running
the executable program in …\AHCI\Intel Rapid Storage
Technology_3.0.0.1112.zip
8. Install the TPM utilities by extracting and running the
executable program in …\TPM\Infineon Trusted Plat-
form Module_Win7_2008_32_2.1.1.0.zip