ADLINK cPCI-6930 User Manual
Page 23
Specifications
9
cPCI-6930
Notes:
1. The SATA direct connector is removable (DB-6920SAT) and
can be replaced with a CompactFlash socket adapter (DB-CF-
SC) or CFast socket adapter. A CompactFlash card, CFast
card and SATA drive cannot be used simultaneously.
2. ADLINK-certified thermal design. The thermal performance is
dependent on the chassis cooling design. Sufficient forced air-
flow is required (see 2.4 "Thermal Requirements"). Tempera-
ture limit of optional mass storage devices may affect the ther-
mal specification.
3. The storage device limits the operational vibration. When appli-
cation requires higher specification for anti-vibration, it is rec-
ommended to use a flash storage device.
Environmental
• Operating Temperature
2
:
Standard: 0 to 55°C with forced air flow
ETT: -20°C to 70°C with forced air flow
• Storage Temperature: -40°C to 85°C
• Humidity: 95% non-condensing
• Shock: 15G peak-to-peak, 11ms duration, non-operating
• Vibration
3
: Operating 2 Grms, 5-500Hz, each axis w/o hard
drive
EMI
• CE EN55022
• FCC Class A
Table 2-1: cPCI-6930 Blade Specifications