Dish Network DVR-7000 - Manual (Page 39)

Operation Section 5
Digital Satellite Receiver Page 5 - 1
©
2
002
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
ri
g
hts
re
s
erved
5
OPERATION 1. TO NAVIGATE THROUGH THE MENUS
1.1. TO SELECT A MODE
1.2. TO SELECT A CHANNEL
NOTE
Unless otherwise specified; this note explains the way you can navigate through
the pages of the EchoNAV user menu.
1. Use the OK key to pull down the menu selection fields.
2. Use the  keys to scroll the selectable items.
3. Use the  keys to navigate between the left and right column of selectable
items.
4. Use the EXIT key to leave the menu and return to the view mode.
5. In a pull-down menu:
- use the OK key to confirm the selection.
- the yellow bar indicates the active selection;
- on the left, the green page indicator indicates where you are.
NOTE
In the following procedures, we assume that you have switched on the TV and the
receiver is in the TV mode.
1. On the RCU, press the OK key;
2. Press the RED key and make the selection.
3. Read the available help text for information.
1. On the RCU, press the OK key.
2. Select the required mode.
3. Read the available help text for information.
4. Select a channel, either:
a. use the keys;
b. use the page + / - keys;
c. use the numbered keys.
NOTE
Normally, you only can view a scrambled channel with the applicable CI-module
and/or smart card inserted in a CI-slot or Viaccess smart card reader.