Dish Network DVR-7000 - Manual (Page 8)

Section 1 Safety Information
Page 1 - 2 EchoStar DVR-7000 Viaccess
©
2
002
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
rig
hts
re
s
erved
3. WARNINGS, CAUTIONS AND NOTES
Throughout this user manual, there may be blocks of text indicated by symbols and printed in
a different way then the surrounding text. These blocks of text ask the attention of the reader
to avoid hazardous situations. The hazard levels are indicated as:
4. SYMBOLS USED ON THE RECEIVER
The next paragraphs explain the meaning of the symbols, present on the receiver.
4.1. SYMBOLS ON THE FRONT PANEL
4.2. SYMBOLS ON THE REAR PANEL
WARNING
T HIS INDICATES A HAZARDOUS SITUATION WHICH , IF NOT AVOIDED , COULD RESULT IN
( SERIOUS ) INJURY .
CAUTION
This indicates a situation which, if not avoided, could damage the equipment or
other properties.
NOTE
This indicates additional information to the user to make the user aware of possible
problems and information of any importance to help the user to understand, to use
and to maintain the installation.
The Dolby Digital logo.
This logo tells you that this receiver is compliant with the Dolby Digital
standard.
The Digital Video Broadcasting logo.
This logo tells you that this receiver is compliant with the DVB standards as
registered under registration number 2365.
The Digital Recording logo.
This logo tells you that this receiver has a hard disk drive which gives you the
capability to record TV and radio programs digitally.
The MP3 logo.
This logo tells you that this receiver has a MP3 player inside.
The Viaccess logo.
This logo tells you that this receiver has an embedded Viaccess smart card
reader. The required smart card has to be obtained from a service provider
who scrambles the programs according the Viaccess encryption method.
The caution ‘risk of electrical shock - do not open’ symbol
This symbol tells you that you are not allowed to open the receiver. Only
authorized (service) technicians are allowed to open the box.
The CE mark.
This mark tells you that the receiver is following the provisions of Council
Directive 89/336/EEC on the approximation of the laws of the Member States
relating to the electromagnetic compatibility and the provisions of Council
Directive 73/23/EEC and 93/68/EEC on the approximation of the laws of the
Member States relating to low voltage and electrical safety.
The double insulation symbol.
This symbol tells you that the receiver is electrically safe within the normal
use of the receiver as stated in the safety chapter.