Dish Network DVR-7000 - Manual (Page 42)

Section 5 Operation
Page 5 - 4 EchoStar DVR-7000 Viaccess
©
2
002
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
rig
hts
re
s
erved
1.6.2. TO LOCK A CHANNEL
CAUTION
You can only lock a channel or favorite if you have set the parental lock and the
PIN-code correctly. We recommend, in the parental lock menu, that you check if
the lock option is set correctly.
NOTE
After you have set a lock onto a channel, the installation and the EDIT menu are
automatically locked with an installation lock to prevent unauthorized access.
Now you can only access these functions if you know the correct PIN-code.
1. In the Edit menu, select the LOCK option.
2. Read the available help text for information.
3. Go to the channel you want to lock.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection.
5. If you want to undo the selection, press the
OK key again.
6. Either:
a. press the WHITE key to confirm the lock and
end the session, or
b. select the next channel you want to lock.
7. You can temporarily unlock all channels:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu;
c. Enter the correct PIN-code as requested;
d. Set the channel lock to Off.
8. You can restore all the locks on the channels:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu;
c. Enter the correct PIN-code as requested;
d. Set the channel lock to On.