Tv and radio related – Dish Network DVR-7000 User Manual

Page 70

Advertising
background image

Section 7

Troubleshooting

Page 7 - 2

EchoStar DVR-7000

Viaccess

©
2

002

E

c

hoS

tar

Inte
rnati

o

nal

C

o

rp

orat

io

n

A

ll

rig

hts

re

s

erved

3.

TV AND RADIO RELATED

Problem

Possible cause

What to do?

1. No picture or sound in the

TV or radio mode.

■

Receiver is in standby.

■

Switch the receiver on.

■

Cable related problems.

■

Check the cable
connections and do any
necessary work.

■

Dish/LNB related
problems.

■

Make sure the dish and
LNB are correctly
adjusted. Do any
necessary work.

2. Bad picture or noisy

sound in the TV or radio
mode.

■

Bad reception of the
signal.

■

Make sure the dish and
LNB are clean and
correctly adjusted. Do
any necessary work.

■

Signal interference with
UHF-installation.

■

Check the UHF settings.
Make sure you use the
correct channel. Please
refer to the TV/radio user
guide.

3. The TV shows a

No Signal message.

■

Bad reception of the
signal.

■

Make sure the channel
selected transmits.

■

Make sure the correct
dish or LNB is selected.

■

Make sure the dish and
LNB are clean and
correctly adjusted. Do
any necessary work.

4. There is no Dolby digital

(AC-3) sound to my other
equipment.

■

The equipment is
connected to the receiver
with a RCA or SCART-
cable only.

■

Connect the
S/P DIF connector of the
receiver to the Dolby
digital input of the
receiving equipment.

5. I cannot view or listen to a

scrambled channel.

■

The CI-module/smart
card is not valid.

■

Insert, for this service, a
valid CI-module/smart
card.

■

The CI-module/smart
card is not (correctly)
inserted.

■

Insert the CI-module/
smart card correctly.

6. I cannot find a channel

which should be there.

■

The group or sort option
is set.

■

Set the group and sort
mode to none.

■

You are in the wrong list.

■

Check the all channels
list and select the correct
(favorite) list.

■

The channel is hidden.

■

Unhide the channel.

7. The TV shows a popup:

■

You have selected an
empty (favorite) list.

■

Press the WHITE key
Select the add option.

■

Press the GREEN key
Select the Current Sat or
All Channels list.

Advertising