Jt5 operator’s manual – Ditch Witch JT5 User Manual
Page 149
Advertising
Service - 148
JT5 Operator’s
Manual
As Needed
CMW
Check Track Tension and Condition
Check track tension and condition and adjust or
replace as needed. See your Ditch Witch dealer for
replacement parts.
To adjust, turn bolt (1) clockwise to tighten and
counterclockwise to loosen. Track tension is correct
when dimension A is approximately 2.25” (57 mm).
Adjust Fan Belt
Adjust fan belt as needed.
1.
Turn off engine and remove key.
2.
Apply moderate thumb pressure to belt
between pulleys where shown.
Belt is properly tensioned when deflection is
about 1/4-3/8” (6-10 mm).
3.
If needed, loosen alternator bolts (1,2) and
pull alternator out until correct tension is
reached.
Advertising