Ditch Witch JT2020 - Manual (Page 137)

Systems and Equipment - 136
JT2020 Mach 1 Operator’s Manual
Quick Wrench
CMW
To Join
1. Scribe straight line across joint on both sides of
separating line (A).
2. Scribe second line (B) on moveable side of joint in
the opposite direction of tightening action .25” (6
mm) away from first line.
3. Turn handle until second line (B) meets first (A).
4. Turn handle opposite direction two turns to relieve
pressure.
5. Remove quick wrench components.
To Break
1. Turn handle until joint is broken.
2. Turn handle opposite direction two turns to relieve pressure.
3. Remove quick wrench components.
j07om071h.eps
A
A A
A
B
B