Ditch Witch JT2020 - Manual (Page 42)

JT2020 Mach 1 Operator’s Manual
Controls - 41
Gauge Cluster
CMW
2. Tachometer/Hourmeter
Displays engine rpm.
Displays engine operating
time.
Full load reading should be 2600 rpm.
Use these times to schedule service.
3. Engine coolant
temperature gauge
Displays engine coolant
temperature. Normal coolant temperature is
160°-212° F (71°-100° C).
4. Engine oil pressure
gauge
Displays engine oil pressure. Full load reading should be 35-65 psi
(2.4-4.5 bar).
At idle, reading should not drop below
12 psi (0.8 bar).
5. Fuel gauge
Displays fuel level in tank. Use only #2 diesel fuel.
Refer to engine operator’s manual for
cold weather fuel recommendations.
Tank holds 30 gal (114 L).
Item Description Notes