Attaching other displays, English attaching other displays – Eurocom M590KE EMPEROR-X User Manual
Page 26
20 - Video Features
Concise User’s Guide
English
Attaching Other Displays
If you prefer to use a monitor or flat panel display, connect it to the DVI-Out port at the rear of the computer.
1.
Attach your external monitor to the DVI-Out port (or TV to the 7-pin S-Video-Out jack), and turn it on.
2.
Go to Additional Properties in the GeForce Go/Quadro FX Properties control panel tab.
3.
Select nView Display Settings (if nView Display Settings do not appear, close and reopen the control panel).
4.
Select the display mode from the nView Display Mode drop box.
5.
Select Apply and click Yes to confirm the settings.
6.
Select the display option from the Primary Display/ Secondary Display dropbox (select and Apply the appropriate option).
7.
Click the display icon to select it, then click the Device Settings button to make any adjustments for the selected display
(including Screen Resolutions & Refresh Rates).
8.
Click Apply to confirm any setting changes.
Figure 10
nView Display Settings
M590KE Concise UG.book Page 20 Friday, October 13, 2006 1:25 PM