Eurocom M590KE EMPEROR-X - Manual (Page 40)

34 - RAID Configuration
Concise User’s Guide
English
8. As the computer boots up you will see the screen below (press F10 to enter the utility).
Figure 15 - MediaShield ROM BIOS Screen
9. The MediaShield ROM BIOS Utility will then appear (if you have not previously set up an array then you will be presented
with the “Define a New Array” menu).
10. Press Tab to navigate through the menu options, the up/down arrow keys to move up and down the drop-down menus, and
Enter to select an option.
11. Any available free hard disks will appear in the menu on the left, and these may be moved into (and removed from) the array
by means of the left/right arrow keys.
Figure 16 - MediaShield ROM BIOS (Define New Array)
MediaShield ROM BIOS 6.75
Copyright (C) 2006 NVIDIA Corp.
Detecting array ...
0 Healthy NVIDIA MIRROR 74.53G
Press F10 to enter RAID setup utility ...
[ ] Add
[ ] Del
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
RAID Mode : Mirroring Striping Block: Optimal
Free Disks Array Disks
Port Disk Model Capacity Port Disk Model Capacity
2.0 TOSHIBA MK8032 74.53GB
2.1 TOSHIBA MK8032 74.53GB
MediaShield Utility Jun 23 2005
- Define a New Array -
[ ] Add
[ ] Del
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
RAID Mode : Mirroring Striping Block: Optimal
Free Disks Array Disks
Port Disk Model Capacity Loc Disk Model Capacity
2.0 TOSHIBA MK8032 74.53GB
2.1 TOSHIBA MK8032 74.53GB
MediaShield Utility JuN 23 2006
- Define a New Array -
M590KE Concise UG.book Page 34 Friday, October 13, 2006 1:25 PM