English – Eurocom M590KE EMPEROR-X User Manual
Page 43
RAID Configuration - 37
Concise User’s Guide
English
32. Run the MediaShield Windows utility from Start > Programs/All Programs > NVIDIA Corporation > MediaShield.
33. The MediaShield Windows utility displays information on the arrays you have setup.
34. The MediaShield Windows utility may be used to rebuild the array or to convert RAID 1 to RAID 0. It is not possible to
convert RAID 0 (2 HDDs) to RAID 1 (2 HDDs).
MediaShield Windows Utility
If the RAID mode is Mirrored (RAID
1) you will be able to use this utility
to rebuild the array, or to convert it
to a Striped array (RAID 0).
If the RAID mode is Striped (RAID
0) this utility will only display infor-
mation on the RAID. Any reconfigu-
ration must be done from the
MediaShield ROM BIOS Utility
(see
Figure 21 - MediaShield Windows Utility
M590KE Concise UG.book Page 37 Friday, October 13, 2006 1:25 PM