EXFO RTU 310-310G IP Services Test Head - Manual (Page 121)

Creating and Starting a Test Case
Ethernet and Fibre Channel Application 109
Ethernet Smart Loopback Test Case
Ethernet Smart Loopback Test Case
Allows transmitting back the received Ethernet stream of data while
interchanging the source and destination addresses of the MAC and IP, in
addition to the source and destination ports for UDP and TCP layers.
To create a Smart Loopback test case:
1. Test configuration:
1a. Select Ethernet 10/100/1000 as the
Interface Type. Interface Type is not
available with RTU-310G.
1b. Select Single Port as the Topology.
Topology is only available with RTU-310.
1c. Select Smart Loopback as the Application Type.
1d. Click Next.
1e. Select the port Connector
Type (Optical or
Electrical RJ-45). Optical is automatically selected for the
Ethernet 10G interface.