EXFO RTU 310-310G IP Services Test Head - Manual (Page 498)

Pop-Up Windows
486 FTB-8500 Series and FTB-8120NGE/8130NGE
VLAN Configuration
VLAN Configuration

Enable VLAN appears only for EtherSAM service configuration, for all
other cases, VLAN is already enabled once the VLAN Configuration
pop-up window is available. Enable VLAN, when selected, allows the
configuration of VLAN. The VLAN check box is not selected by default.

Stacked VLAN: Enables up to
3 stacked VLAN.

Binary: When enabled,
displays the VLAN ID in
binary. This setting is
disabled by default.

VLAN #1 (C-VLAN) /
#2 (S-VLAN) / #3 (E-VLAN)

ID: Enter the VLAN ID.
Choices are 0 through
4095; refer to
VLAN/B-VLAN on
page 464 for more
information.

Priority: Select the VLAN user priority. Choices are 0 to 7; refer to
VLAN/B-VLAN on page 464 for more information. The default
setting is 0 (000 - Low Priority).

Type: Allows the selection of the VLAN Ethernet Type. Choices are
8100, 88A8, 9100, 9200, and 9300. The default setting is 8100 for
VLAN #1 (C-VLAN), 88A8 for VLAN #2 (S-VLAN), and 9100 for
VLAN #3 (E-VLAN).

Drop Eligible: When the Drop Eligible check box is selected
(DEI = 1), these transmitted frames will be dropped first on receipt
when congestion occurs under test. Drop Eligible is not available
when VLAN type is 8100. This setting is disabled by default.