EXFO RTU 310-310G IP Services Test Head - Manual (Page 434)

Tools Tabs
422 FTB-8500 Series and FTB-8120NGE/8130NGE
ADC Configuration
ADC Configuration
Note: The ADC Config tab is only available when ADC is selected as the ENIU
type. In order for the configuration to work, the ADC ENIU needs to be set to
EXFO mode. Not available with 10Gig-E.
Click Tools, ENIU, and ADC Config.
Remote ENIU List
Lists the detected ENIUs on the network or part of the RTU-310/310G VLAN
domain when VLAN is enabled. Up to 20 ENIUs can be listed.

ID: Indicates the ENIU number. The ENIUs are sequentially numbered
as they are detected.

System Name: Indicates the name of the detected ENIU.

MAC Address: Indicates the MAC address of the detected ENIU.

Loopback Status: Indicates the loopback status (Enabled/Disabled) of
the ENIU.