EXFO RTU 310-310G IP Services Test Head - Manual (Page 42)

Getting Started
30 RTU-310/310G
Connecting the Management Interfaces
Connecting the Ethernet LAN Port
The RTU-310/310G LAN interface is designed to provide remote
connectivity to the unit through a typical management network.
To connect remotely to the RTU-310/310G:
Both the RTU-310/310G unit and remote PC must be connect to the
same management network using standard straight through Ethernet
cables with RJ-45 connectors. Refer to Ethernet Cables on page 455 for
more information.
The remote PC must be running the EX-Vu remote application. Refer to
To log on to the RTU-310/310G interface using SUI: on page 37 or
Connect to the RTU-310/310G using TightVNC: on page 474 for more
information.
For RTU-310
For RTU-310G
Note: The LAN port is by default set to acquire the IP address from a DHCP
network device. It can alternatively be configured to use a static IP address
if required.
10/100 Mbps Ethernet LAN Port
10/100 Mbps Ethernet LAN Port