EXFO RTU 310-310G IP Services Test Head - Manual (Page 166)

Port Tabs
154 FTB-8500 Series and FTB-8120NGE/8130NGE
Advanced Auto-Neg. TX
Advanced Auto-Neg. TX
Note: Advanced auto-negotiation is not available with the optical 100 Mbps and
10 Gig-E interfaces or when Through Mode (RTU-310) is selected.
Click TEST, Port, and Advanced Auto-Neg TX.
Advanced Auto-Neg. Mode
The Auto-Negotiation should be activated if the remote connected port is
also set to Auto-Negotiation, otherwise should be deactivated. When
activated, the RTU-310/310G will indicate to the remote port which
parameters to use. This setting is disabled by default.
The negotiation process is not immediately started when enabling the
auto-negotiation, the Negotiate button is used to start the process.
The Auto-Negotiation will use either the Configuration (Speed, Duplex and
Flow Control) settings, or the Local Capabilities when enabled.
The port configuration settings from the are disabled when Advanced
Auto-Neg. Mode is enabled.