EXFO RTU 310-310G IP Services Test Head - Manual (Page 407)

System Tabs
Ethernet Test Module 395
RTU Setup

Current Date and Time: Allows the selection of the specific date
(YYYY-MM-DD) and time (HH:MM:SS) when the IP address of a NTP
server is not specified.

Time Zone: Allows the selection of the time zone from the drop-down
list.

Daylight Saving: Allows automatic adjustment of clock for daylight
saving changes.
BrixWorx Server
You can configure RTU-310 in BrixWorx. The following tests can run on
RTU-310 for BrixWorx.

EtherSAM Service Performance Active

RFC 25445 Active
For configuration information, refer BrixWorx User Guide and for test
information, refer Test Suite Reference Guide.
The following configuration parameters are available for the BrixWorx
server. To apply the changes to the IP parameters, click Save.

IP Address: Sets the IP address of the BrixWorx server.

Port: Sets the port number of the BrixWorx server.

Save: Click to apply the changes.
Restart Unit
Restarts the RTU-310/310G unit.