EXFO IQS-3150 Variable Attenuator for IQS-500/600 - Manual (Page 117)

SCPI Command Reference
Variable Attenuator 111
Product-Specific Commands—Description
:INPut[1..n]:WAVelength
Description This command selects a specific wavelength.
At *RST, the wavelength that will be selected
depends on the instrument you have.
Syntax :INPut[1..n]:WAVelength<wsp><Wavelength[<
wsp>M]>|MAXimum|MINimum|DEFault
Parameter(s) Wavelength:
The program data syntax for <Wavelength> is
defined as a <numeric_value> element
followed by an optional <SUFFIX PROGRAM
DATA> element. The allowed <SUFFIX
PROGRAM DATA> element is M. The
<Wavelength> special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
lowest supported value.
MAXimum allows to set the instrument to the
highest supported value.