Glow-worm Envirosorb3 - Manual (Page 13)

Assembly and installation 5
0020154078_03 Envirosorb₃ Installation instructions 13
5.1.2.3 Selecting the installation site
▶ Observe all valid regulations.
▶ Install the product outside the building.
▶ Do not install the product:
– Near a heat source,
– Near flammable materials,
– Near ventilation openings for adjacent buildings,
– Under deciduous trees.
▶ Note the following points when installing the product:
– Prevailing winds,
– The visual impression on the environment
▶ Avoid places where strong winds blow on the product's
air outlet.
▶ Point the fan away from nearby windows. Install noise
protection if necessary.
▶ Install the product on one of the following supports:
– Concrete slab,
– Steel T-beam,
– Concrete block,
– Elevating socket (accessory),
– Wall bracket (permitted accessory for Envirosorb
3
5,
Envirosorb
3
8 and Envirosorb
3
11).
▶ Do not expose the product to dusty or corrosive air (e.g.
near unsecured streets).
▶ Do not install the product near ventilation shafts.
▶ Prepare the routing for the electrical lines.
dB(A)
dB(A)
▶ Note any noise emissions from the fan and compressor.