Maintenance – Glow-worm Ultracom2 sxi User Manual
Page 43
Advertising
0020092785_02 - 05/10 - Glow-worm
- 41 -
18.7 Condensate trap
a
Warning: condensate is mildly acidic. Use
protective gloves.
5
4
3
2
1
1
Key
1 The condensate trap
2 Discharge of condensates
3 Siphon
4 Condensate trap retaining clips
5 Hose
• Place a container under the condensate trap (1).
• Remove the siphon (3) from he recoverer and clean.
• Disconnect the condensation discharge (2).
• Disconnect the heat exchanger hose (5).
• Remove the condensate trap (1) using the clips (4).
• Clean the hose, the trap and the siphon, remove any
accumulated dirt.
• Reassemble the components, taking care to position the
gaskets correctly.
• Start the siphon (3) and fill with water.
MAINTENANCE
Advertising