Golden Blount SF 3624 TV - Manual (Page 13)

13
OPERATING GUIDELINES (CONT’D)
When lit for the first time, the appliance will emit a
slight odor for an hour or two. This is due to paint
and lubricants used in the manufacturing process.
The main burner flame characteristics are steady,
not lifting or floating. Typically, the top 3/4 inch of
the pilot generator should be engulfed in the pilot
flame. A periodic check of these characteristics is
necessary.
CAUTION: THE LOGS CAN GET VERY HOT!
HANDLE ONLY WHEN COOL
MAINTENANCE INSTRUCTIONS
Visually inspect pilot periodically. Brush or blow away any dust or linen accumulations.
If pilot orifice is plugged, disassembly may be required to remove any foreign material
from orifice or tubing.
Venting system should be periodically examined by a qualified service technician or
agency to ensure proper air flow.
WIRING DIAGRAM (MILLIVOLT MODEL)
Figure 11