Hanna Instruments HI 98360 - Manual (Page 17)

17
• The temperature coeficient.
• The instrument ID.
LAST NaCl CALIBRATION DATA
Last NaCl calibration data is stored automatically after a successful
calibration.
To view the NaCl calibration data, press
GLP when the instrument is in
NaCl measurement mode. The instrument will display:
• The date and time.
Press the
ARROW key to view the next logged calibration parameters
(pressing the key).
• The cell constant (as for EC range).
• The salinity coefficient.
• The instrument ID (as for EC range).
Notes: • If NoTC is selected as temperature compensation mode during
calibration, the temperature coefficient is not displayed in
GLP.
• Press GLP at any moment and the instrument will return to
measurement mode.
• If calibration has not been performed in NaCl range, the
instrument displays “ no CAL” message blinking.