Hanna Instruments HI 98360 - Manual (Page 30)

30
TAGS & SYMBOLS
LCD MESSAGE GUIDE LCD MESSAGE GUIDE LCD MESSAGE GUIDE LCD MESSAGE GUIDE LCD MESSAGE GUIDE
• Mode tags light up for indicating the corresponding active mode,
and blink for warning the user.
MEASURE on: Instrument in measurement mode.
SETUP on: SETUP menu mode has been entered.
CALIBRATION on: calibration mode has been entered.
GLP on: GLP mode has been entered.
RECALL MEMORY on: RECALL MEMORY mode has been entered.
• Reading in HOLD:
HOLD on: reading frozen in AutoEnd mode.
HOLD blinking: reading unstable in AutoEnd mode.
• Indication of temperature compensation mode:
MTC for manual, ATC for automatic compensation.
• blinking (while in calibration): reading unstable.
• Main active key messages light up for indicating the corresponding
active key.
CAL on: CAL key available.
CFM blinking: ask confirmation of calibration or set value.
SETUP on: SETUP key available.
GLP on: GLP key available.
RANGE on: RANGE key available.
LOG on: LOG key available.
RCL on: RLC key available.