Hanna Instruments HI 98360 - Manual (Page 20)

20
LOGGING (HI 98360 LOGGING (HI 98360 LOGGING (HI 98360 LOGGING (HI 98360 LOGGING (HI 98360 only only only only only)))))
This feature allows the user to log EC, TDS or NaCl measurements,
together with corresponding temperature automatically. All logged data
can be transferred to a PC through the USB port.
The maximum logging space is 500 record locations.
LOGGING THE CURRENT DATA
To store the current reading into
memory, press
Log while in
measurement mode.
The instrument will display the current date
(mm.dd) on the primary LCD, the record number
on the secondary LCD and then the number of
available tags remaining.
If there are less than 6 memory locations
remaining, the “
Lo” message will blink for a
few seconds to alert the user, and then the
available log number is displayed on the LCD.
If the LOG space is full, “ FULL LOG” message
will be displayed on the LCD for a few seconds
and then ”
FrEE 0” message.
The instrument returns to normal measurement
mode.
VIEW LOGGED DATA
Press 2nd then RCL to retrieve the information stored while in measurement
mode for the specific range. “ RECALL MEMORY” will be displayed on LCD.
If no records were logged, the instrument will
display “
no rEC” message blinking.
Otherwise, the instrument will display the
logged data, in according with the selected
range:
• If RCL mode was entered while the instrument
was in EC range: the last EC memorized
reading appears on the primary LCD and
the record number on the secondary LCD.
• If RCL mode was entered while the instrument
was in TDS range: the last TDS memorized
reading appears on the primary LCD and
the record number on the secondary LCD.