Labconco TXE Tall XPerEnclosure 3892022 - Manual (Page 10)

Chapter 3: Getting Started
Product Service 1-800-522-7658 6
Unpacking the Enclosure
Carefully remove the shrink-wrap or carton on the enclosure and inspect it for
damage that may have occurred in transit. If damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO. UNAUTHORIZED
RETURNS WILL NOT BE ACCEPTED.
IF ENCLOSURE WAS DAMAGED IN TRANSIT, YOU MUST
FILE A CLAIM DIRECTLY WITH THE FREIGHT CARRIER.
LABCONCO CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGES.
Do not discard the packing material until you have checked all of the components
and tested the enclosure. We recommend that you do not remove the enclosure
from its shipping container until it is ready to be placed into its final location.
Move the unit by placing a flat, low dolly under the shipping skid, or by using a
floor jack.
Do not move the enclosure by tilting it onto a hand truck.
Installing the TXE on a Supporting Structure
When installing the enclosure onto a supporting structure benchtop, ensure that the
structure can safely support the combined weight of the enclosure and any related
equipment.

!
The United
States
Interstate
Commerce
Commission
rules require
that claims be
filed with the
delivery
carrier within
fifteen (15)
days of
delivery.
