Labconco TXE Tall XPerEnclosure 3892022 - Manual (Page 9)

Product Service 1-800-522-7658 5
Chapter 3:
Getting Started
Now that the site for your TXE is properly prepared, you are ready to unpack,
inspect, install, and validate your system. Read this chapter to learn how to:

Unpack and move the enclosure.

Set up the enclosure with the proper supporting structure.

Installation of HEPA filters.

Connect the electrical supply.

Set the face velocity with the speed control adjustment.

Arrange validation for the enclosure.
Each TXE model weighs approximately 213 lbs (79 kg). If you
must lift the enclosure manually, follow safe lifting guidelines.
The TXE may be “top-heavy,” keep the enclosure vertical.
NEVER attempt to put any lifting force on the front doors!
Secure the glass doors with tape whenever moving or lifting the
enclosure.
!