Labconco TXE Tall XPerEnclosure 3892022 - Manual (Page 48)

Product Service 1-800-522-7658 44
Appendix C:
Specifications
This Appendix contains technical information about the XPert TXE including
electrical specifications and environmental operating conditions.
Electrical Specifications

3 Amps, 115V, 60 Hz

2 Amps, 230V, 50Hz
Environmental Conditions

Indoor use only.

Maximum altitude: 6562 feet (2000 meters).

Ambient temperature range: 41° to 104°F (5° to 40°C).

Maximum relative humidity: 80% for temperatures up to 88°F (31°C),
decreasing linearly to 50% relative humidity at 104°F (40°C).

Main supply voltage fluctuations not to exceed ±10% of the nominal
voltage.

Transient over-voltages according to Installation Categories II (Over-
voltage Categories per IEC 1010). Temporary voltage spikes on the AC
input line that may be as high as 1500V for 115V models and 2500V for
230V models are allowed.

Used in an environment of Pollution degrees 2 (i.e., where normally only
non-conductive atmospheres are present). Occasionally, however, a
temporary conductivity caused by condensation must be expected, in
accordance with IEC 664.