Labconco Paramoun Ductless Enclosures 69636 Series, 6' Widths User Manual
Page 12
Product Service 1-800-522-7658
7
C
C
h
h
a
a
p
p
t
t
e
e
r
r
3
3
:
:
G
G
e
e
t
t
t
t
i
i
n
n
g
g
S
S
t
t
a
a
r
r
t
t
e
e
d
d
Now that the site for your Paramount Ductless Enclosure is properly
prepared, you are ready to unpack, inspect, install, and validate your system.
Read this chapter to learn how to:
Unpack and move the enclosure.
Set up the enclosure with the proper supporting structure and work
surface.
Install carbon filters and/or HEPA filters.
Connect the electrical supply.
Set Filter Life and Filter Check Timers.
Reset or change the face velocity, if necessary.
Validate the enclosure.
Seal the enclosure to the work surface.
If applicable, connect to an exhaust system.
Depending upon which model you are installing, you may need common
mechanical and electrical installation tools in addition to 5/16", 3/8", 7/16",
and 1/2" wrenches, ratchets, sockets, a nut driver set, a flat-blade screwdriver,
a Phillips screwdriver, and a carpenter level to complete the instructions in
the chapter.
Note: Each enclosure model weighs between 125 to 350 lbs. (55 to 152 kg).
The shipping container allows for lifting with a mechanical lift truck or
floor jack. If you must lift the enclosure manually, follow safe-lifting
guidelines.
Do not lift by the front air foil
.