Labconco Purifier Filtered PCR Enclosures 3970425 User Manual
Page 17
Advertising
Chapter 3: Getting Started
Product Service 1-800-522-7658
13
The Purifier Filtered PCR Enclosures have been tested at Labconco before
shipment and provide ISO Class 5 clean air conditions inside the enclosure.
Labconco also performed extensive performance testing to validate the Filtered
PCR’s for product protection under ISO Class 5 conditions. For copies of these
validation reports, contact Labconco Customer Service.
Sealing the Filtered PCR Enclosure to the
Work Surface
When the Filtered PCR Enclosure has been set in place and wired, it may be sealed
at the work surface to prevent materials from collecting under the walls. A bead of
silicone sealant is recommended to seal the Filtered PCR Enclosure to the work
surface.
Advertising
This manual is related to the following products: