Labconco Purifier Filtered PCR Enclosures 3970425 - Manual (Page 25)

Product Service 1-800-522-7658 21
C
HAPTER
5
A
PPROPRIATE
A
PPLICATIONS
F
OR
Y
OUR
F
ILTERED
PCR
E
NCLOSURE
Now that the installation of your Filtered PCR Enclosure is completed, you are
ready to use it. Read this chapter to learn about:
1. Routine Daily Work Procedures.
2. Suitable Applications.
3. Appropriate HEPA Filter Applications, Suitability and Guidelines.
Routine Daily Work Procedures
Planning

Arrange for minimal disruptions, such as room traffic or entry into the
room while the enclosure is in use.
Start-up

Turn on blower and light. Turn off the UV light and remove the UV
closure panel.

Only raise the sash for loading and cleaning.
 Allow the enclosure’s blower to operate unobstructed for 1 minute.

Wear a long sleeved lab coat, rubber gloves and use protective eyewear.
Wear a protective mask if appropriate. Consult your Safety Officer for
additional personal protective equipment recommendations.

Wipe down interior surfaces with a mild household detergent or
disinfectant. DO NOT use abrasive cleaners, bleach or solvents.