Labconco Protector XStream Laboratory Fume Hoods 9840803 - Manual (Page 17)

13 Product Service 1-800-522-7658
Chapter 3: Getting Started
Figure 3-1
Connecting to the Protector
XStream Hood Exhaust System
WARNING: The weight of the exhaust
ductwork system must be supported
independently of the hood superstructure. Do
not allow this weight to be supported by the hood
structure as damage to the hood may occur.
The exhaust connection should be installed by a
qualified HVAC contractor.
The exhaust connection on your hood has been
designed for 12" nominal pipe (12.75" OD) to allow
!
Place Cross
Support Here
.