Labconco Protector XStream Laboratory Fume Hoods 9840803 - Manual (Page 6)

2
Product Service 1-800-522-7658
Chapter 1: Introduction
About This Manual
This manual is designed to help you learn how to install, use, and
maintain your laboratory fume hood. Instructions for installing
optional equipment on your hood are also included.
Chapter 1: Introduction provides a brief overview of the
laboratory fume hood, explains the organization of the manual, and
defines the typographical conventions used in the manual.
Chapter 2: Prerequisites explains what you need to do to prepare
your site before you install your laboratory fume hood. Electrical
and service requirements are discussed.
Chapter 3: Getting Started contains the information you need to
properly unpack, inspect, install, and certify your laboratory fume
hood.
Chapter 4: High Performance Features and Safety Precautions
explains how the Protector XStream operates and the appropriate
precautions you should take when using the fume hood.
Chapter 5: Using Your Protector XStream discusses the basic
operation of your fume hood. Information on how to prepare, use
and shut down your Protector XStream Hood are included.
Chapter 6: Maintaining Your Protector XStream explains how to
perform routine maintenance on your fume hood.
Chapter 7: Modifying Your Protector XStream explains how to
modify the fume hood or add accessories.
Chapter 8: Troubleshooting contains a table of problems you may
encounter while using your laboratory fume hood including the
probable causes of the problems and suggested corrective actions.
Appendix A: Protector XStream Hood Components contains
labeled diagrams of all of the components of the fume hoods.
Appendix B: Protector XStream Hood Dimensions contains
comprehensive diagrams showing all of the dimensions for the
laboratory fume hoods.