Labconco Protector XStream Laboratory Fume Hoods 9840803 - Manual (Page 8)

4
Product Service 1-800-522-7658
Chapter 1: Introduction
Your Next Step
If your Fume Hood needs to be installed, proceed to Chapter 2:
Prerequisites to ensure your installation site meets all of the
requirements. Then, go to Chapter 3: Getting Started for
instructions on how to install your laboratory fume hood and make
all of the necessary connections.
If you would like to review how Labconco’s high performance
laboratory fume hoods operate, go to Chapter 4: High
Performance Features and Safety Precautions.
For information on the operational characteristics of your
laboratory fume hood, go to Chapter 5: Using Your Protector
XStream Hood.
If your laboratory fume hood is installed and you need to perform
routine maintenance on the cabinet, proceed to Chapter 6:
Maintaining Your Protector XStream Hood.
For information on making modifications to the configuration of
your fume hood, go to Chapter 7: Modifying Your Laboratory
Fume Hood.
Refer to Chapter 8: Troubleshooting if you are experiencing
problems with your fume hood.