Laerdal AED Trainer 3 - Manual (Page 14)

14
USER INSTRUCTIONS
Using the AED Trainer 3
OK
1 2 3 4 5 6 7 8
AED Tr
ainer 3
PREPARING TO USE THE AED TRAINER 3
Before turning on the AED Trainer 3, follow the steps
below:
1 Check that the pads are pre-connected as described,
see section: Connecting the training pads. If no training
pads are connected when the AED Trainer 3 is turned
on, the AED Trainer 3 will provide a voice instruction
to place the pads on the patient’s bare chest and then
plug in the pads connector by the flashing light.
2 If you are using HeartStart Training Pads III, attach the
external manikin adapter provided to the skin of the
training manikin as shown below.
3 Place the pads on the adapter as shown.
1 2 3 4