Laerdal AED Trainer 3 - Manual (Page 9)

9
SETUP
SELECTING A LANGUAGE
The default language of the AED Trainer 3 is US English. To set up the AED Trainer 3 for another language, follow the steps
below.
1 Press and hold both the green On/Off button and the orange Shock button for about six seconds. The AED Trainer 3
announces the default language “US English”.
2 Release both buttons.
3 Press and hold the orange shock button to scroll through each available language. The AED Trainer 3 announces each
new language.
4 When the desired language is announced, press the green On/Off button to turn off the AED Trainer 3 and store the
selected language. The AED Trainer 3 will use this language when it is next turned on.*
5 Apply the appropriate “Training Only” sticker for the language selected, as illustrated below.
* The AED Trainer 3 can be turned on by pressing either the on/off button or the shock button.