Laerdal AED Trainer 3 - Manual (Page 16)

16
USER INSTRUCTIONS
SELECTING A TRAINING SCENARIO
When you are ready to use the AED Trainer 3, follow the steps below:
1 Press and hold the green On/Off button for approximately six seconds. The AED Trainer 3 will instruct you to press
the orange Shock button to select a training scenario.
2 Press the orange shock button as directed. The AED Trainer 3 announces the current training scenario number.
3 To select a different scenario, press and hold the orange shock button to scroll through each of the eight scenarios in
sequence. The AED Trainer 3 announces each scenario number as it is reached. See section: Appendices for a detailed
description of each scenario.
4 When you reach the desired scenario, press the On/Off button to turn off the AED Trainer 3 and store the scenario
selection on the Operating System Card. The selected scenario will be active the next time the AED Trainer 3 is turned
on.
Note: The AED Trainer 3 automatically turns off automatically if it is inactive for ten minutes.
RUNNING A TRAINING SCENARIO
To run a training scenario, press the On/Off button to turn on the AED Trainer 3, and following the AED Trainer 3’s voice
instructions to simulate use of the FR3 AED in an emergency. For troubleshooting assistance, see section troubleshooting tips.