Connecting the blood pressure cuff, Calibrating the blood pressure cuff using lleap, Connecting the spo – Laerdal SimMan Essential User Manual
Page 21: Probe, Setup
21
SETUP
Connecting the Blood Pressure Cuff
The Patient Simulator is delivered with a specially adjusted blood
pressure cuff. Connect the tube to the white BP connector at the
side of the Patient Simulator before use.
Calibrating the Blood Pressure Cuff
Using LLEAP
1 Select <Tools> <Maintenance> and choose <Calibrate BP...>
2 Follow the onscreen wizard instructions to perform the
calibration.
Connecting the SpO
2
Probe
The SimMan Essential SpO
2
probe is made up of a light
diode and light sensor. When
the beam between the diode
and sensor is broken, the
Patient Monitor Application
registers that the SpO
2
probe is
connected.
1 Connect the probe’s USB
plug to the Patient Monitor
PC.
2 The probe can be placed on any suitable area on the Patient
Simulator. Ensure that the probe is always firmly fixed in position.
Cautions
and
W
arnings
Featur
es
Setup
Maintenance
Spar
e Par
ts
Tr
oubleshooting