Attaching the left leg, Attaching the right leg, Maintenance – Laerdal SimMan Essential User Manual

Page 29: Left leg to pelvis – cable and tube descriptions, Right leg to pelvis – cable and tube descriptions

Advertising
background image

29

MAINTENANCE

Attaching the Left Leg

Note: Assemble the Patient Simulator on a large flat surface. Attach

the Left Leg before the Right Leg.

Open the torso to access the hip joint connectors. To open the
torso follow steps 1 – 4, Opening the Torso.

1 Align the left leg bolt and cables with the pelvis socket.

2 Feed the leg bolt and cable through the socket and into the

torso. Do not pull the leg by the cables and/or tubes.

3 Carefully push the leg in towards the pelvis to form a snug fit.

Hip joint connector with side slot for
inserting cables and tubes (shown right)

4 Position the connector with rounded

end facing downward. Place the leg
cables and tubes into the side slot of
the connector.

5 Slide the connector downwards along

the tubes and cable and onto the leg bolt. Ensure that the nut
and bolt are aligned, and that all cables and tubes are secured
within the connector.

6 Screw the connector onto the leg bolt. Avoid twisting the cable.

Tighten the connector so that the leg is able to rotate freely
around the hip joint connector.

7 Connect the cable as shown in the following page.

Left Leg to Pelvis – Cable and Tube Descriptions

Name/Label Tube/Cable Color Connector Description
Left Pedal

Grey cable

black with silver coloured
connector

Attaching the Right Leg

Please take the same precautions as when attaching the Left Leg.

1 Align the Right Leg bolt and cables with the pelvis socket. Feed

the leg bolt and cabling through the pelvis socket.

2 Carefully push the leg in towards the pelvis to form a snug fit.

3 Secure the cables and tubes in the connector. Screw the

connector in place on the leg bolt.

4 Connect the corresponding tubes and cables as shown in the

table below:

Right Leg to Pelvis – Cable and Tube Descriptions

Name/Label

Tube/Cable Color

Connector Description

Blood Right leg

Transparent, red
tube

Black twist and lock
connector

Right leg

Black harness cable

Black rectangular
connector, 4 lead

Air from leg

Colourless
transparent tube

White twist and lock
connector

Fluid from leg

Tube, blue

White twist and lock
connector

Cautions

and

W

arnings

Featur

es

Setup

Maintenance

Spar

e Par

ts

Tr

oubleshooting

Advertising