Laerdal Virtual IV - Manual (Page 18)

Setting up the System
www.laerdal.com 18
Virtual I.V.
Directions for Use
This diagram, also available as a fold-out set of instructions that is included in the
Virtual I.V.™ packaging, explains the order of unpacking and installation of the simula-
tor. Special attention should be paid to unpacking the haptic device and plugging in
the cables in the correct order and placement.
(1) Set-up and turn on the computer as indicated by the manufacturer:
(2) Plug in the power cord of the haptic device into the wall socket, but do not connect to haptic device:
Setting up the System
www.laerdal.com
Virtual I.V.
Directions for Use