Laerdal Virtual IV - Manual (Page 21)

Plug the (7) USB cord and (8) Power Cord into the back of the haptic device. (9) Plug the power cord from
the wall socket into the power brick. The haptic device, which has been pre-calibrated by the manufacturer,
is now ready to use with the simulator:
(10) The completed, set-up Virtual I.V.™ Self-Directed Learning System. Note the location of the haptic
device directly in front of the monitor.
9
7 8
Setting up the System
21 www.laerdal.com
Virtual I.V.
Directions for Use