Laerdal Virtual IV - Manual (Page 29)

8. Simulation Screen
This screen provides the basis for performing the cannulation procedure. It shows an arm of the
patient described in the case. When you have completed the simulation, advance to the debriefing
screen by clicking the right arrow in the navigation bar. The arm can be rotated by clicking the middle
mouse wheel and moving the mouse, and zoomed by scrolling the middle mouse button.
Overview
The equipment you have selected appears in the equipment toolbar at the left of the screen. You can
use any of these pieces of equipment at any time by clicking on the corresponding icon.
At the top of the screen are 3 buttons that allow you to review the case scenario (Case Scenario),
select more equipment (Equipment), or select a different site for catheterization (Site Selection). You
can select these throughout the procedure.
Certain procedural steps can be performed by clicking on the corresponding icons. These icons are
located around the left periphery of the circular simulation window.
At the bottom of the simulation window are three disposal containers (trash can, sharps container
and bio-hazard bag). Dispose of equipment into the appropriate receptacle once it has been used.
QuickStart User Guide
29 www.laerdal.com
Virtual I.V.
Directions for Use