Rocktron Utopia B100 - Manual (Page 10)

10
10 UP button
This button allows you to scroll UP through the available presets. Press the button once to move
one preset UP, or press and hold down the button to auto-scroll UP. Note that once you have
reached your desired preset, the preset name on the screen will be fl ashing but NOT recalled.
The original preset will still be active. To recall or activate the desired preset you will need to
press the "RECALL" button.
11 INPUT jack
This standard, mono 1/4" jack is used to provide input to the unit.
12 OUTPUT RIGHT jack
This 1/4" jack provides the right output of the UTOPIA B100 for use in stereo situations, such as
direct recording, plugging into a PA system, two bass amplifi ers, etc.
13 OUTPUT LEFT/MONO jack
This 1/4" jack provides the left output of the UTOPIA B100. This output is a MONO output and
should be used in mono situations, such as plugging into the front of an amplifi er. For stereo
situations you must also use the OUTPUT RIGHT Jack.
14 AUX INPUT Jack
This 1/8" stereo jack provides an auxiliary input allowing you to plug a MP3 Player, CD Player,
etc. so that you can jam along with your favorite tunes.
15 PHONES jack
This 1/8" stereo jack provides a stereo output allowing you to practice in private. Note that you
need to activate the "STEREO" parameter in the GLOBAL Function in order to have a stereo
sound. Additionally, it is recommended that you set the Speaker Exciter in the GLOBAL Func-
tion to "LOCK BOTH" as well. Note, this setting will be used until you turn OFF the UTOPIA
B100. The SPEAKER Exciter setting used in each preset may be modifi ed per preset while in
this mode. See page 18 for more information on the GLOBAL Function.
16 POWER jack
This 4-pin DIN connector accepts power from the 9VAC/2A adaptor supplied with the unit.
17 POWER Switch
Use this switch to turn the UTOPIA B100 On and Off.
3. UTOPIA B100 Top and Back Panels....continued.....