Rocktron Utopia B100 - Manual (Page 58)

58
Editing a preset title:
3 5 2,4 1
To begin the Title Edit function, turn the FUNCTION SELECT knob clockwise until
the UTOPIA B100 displays "TITLE EDIT". Step 1
Turn the PARAMETER SELECT knob clockwise to initiate the Title Edit mode.
Turning this knob will also select the character location to be edited. The letter to be
adjusted will have a fl ashing box over the character selected.
** TITLE EDIT **
Step 2
57 PRESET TITLE
(Flashing box)
Use the PARAMETER ADJUST knob to select the desired character for the current
position (fl ashing box). Step 3
57 MRESET TITLE
To edit the character in the next position, turn the PARAMETER SELECT knob one
step clockwise. The fl ashing box will move to the next character. Step 4
NOTE: The STORE button must be pressed to save the new title. Exit-
ing the Title Edit function before pressing the STORE button will erase
any editing that was done in Title Edit. Also, after fl ashing "STORED",
the UTOPIA B100 will exit the title edit mode and return to the main preset
number.
After all the characters have been edited as needed, press the STORE button to save the
new title memory. The UTOPIA B100 will fl ash "STORED" briefl y. Step 5
STORED
57 MRESET TITLE