Rocktron Utopia B100 - Manual (Page 20)

20
MIXER Function
The next function displayed after turning the FUNCTION SELECT knob clockwise is the Mixer
function. The Mixer function parameters are included in all presets -- regardless of which confi guration
is currently recalled -- although the parameter values stored in this function are only for the currently
recalled preset.
This digital mixer allows you to control most signal levels pertaining to each preset's confi guration
and stores these levels for each preset.
The PARAMETER SELECT knob will allow you to access these Mixer parameters:
The VOLUME parameter determines the overall signal level of the current pre-
set.
The LEFT OUT LEVEL parameter allows you alter the level of the left channel
output of the current preset independent of the right channel.
The RIGHT OUT LEVEL parameter allows you alter the level of the right chan-
nel output of the current preset independent of the left channel.
The DIR/EFF MIX parameter is used to defi ne the ratio of direct signal level to
effect (Chorus, Flange, Pitch Shift) signal level.
The DIRECT PAN parameter allows you to pan the direct signal to the left or
right.
The DELAY LEVEL parameter determines the overall level of the delayed signal
at the output relative to the direct signal and other effect signals. This parameter
can also be accessed from the Delay function parameter list.
The REVERB LEVEL parameter determines the level of the reverb signal at the
output relative to the direct signal and other effect signals. This parameter can
also be accessed from the Reverb function parameter list.
VOLUME
LEFT OUT LVL
RIGHT OUT LVL
MIX DIR/EFF
DIR PAN
DELAY LVL
REVERB LVL