Rocktron Utopia B100 - Manual (Page 59)

59
PARA1 PEDAL VOLUME
Turn the PARAMETER SELECT knob for the fi rst parameter of the Controller Assign func-
tion. This parameter allows you to select a controller number for the NUMB 1 parameter to
respond to. Step 2
Step 1 To access the Pedal Controller function, turn the FUNCTION SELECT knob clockwise to
"PEDAL CONTROLERS".
PEDAL CONTROLER
3,5,7,9 12 2,4,6,8,10 1
NUMB 1 XXX
NOTE: This parameter (NUMB 1 only) also gives you the option of selecting "ADJ". When "ADJ" is
selected, the parameter assigned to the fi rst controller (PARA 1) can be instantly accessed by turning
the PARAMETER ADJUST knob when the preset title is displayed. This allows you to access a param-
eter that you adjust frequently without paging through function headings and parameters. If you select
"PED" the parameter assigned to the fi rst controller (NUMB 1) will be adjusted by the built-in expres-
sion pedal. If you select "OFF" the fi rst controller will not be assigned to either the "ADJ or the PED".
Step 5
Step 4
Step 3 Use the PARAMETER ADJUST knob to select the controller to be assigned to the NUMB 1
parameter (either ADJ, PED or OFF).
NUMB 1 ADJ
Use the PARAMETER ADJUST knob to scroll through the available parameters to be as-
signed to the PARA 1 parameter.
Turn the PARAMETER SELECT knob to select "PARA 1". This parameter allows you to
select a parameter for for the PARA 1 parameter to respond to.
The "Pedal Controllers" function allows for specifi c UTOPIA B100 adjustable parameters to be
mapped (or assigned) to the built-in expression pedal for real-time control over the selected parameter.
The Pedal Controllers option lets you assign one knob (the Parameter Adjust knob) for "quick adjust" or
assign one or two parameters to the built-in expression pedal. The Pedal Controllers also lets you store
an upper and lower parameter value limit which the controller cannot exceed. For example, when using
the expression pedal to send continuous control changes to control the "PITCH" parameter, an upper
limit of +300 can be set and a lower limit of -200 can be set — even though the actual parameter range
available is from +1200 to -2400. When the expression pedal is at its heel position in this example, the
"PITCH" parameter will be at -200, while at its toe position it will be at +300. Up to two controllers can
be assigned for each individual preset.
Pedal Controllers
PARA1 XXXX